Tradinco

The specialist for calibration, service & instruments

About Tradinco Instruments

Over more than 60 years, Tradinco Instruments has evolved into a specialist in calibrations. In our climate-controlled calibration laboratory, we conduct calibrations not only for pressure but also for the parameters of electrical and temperature. The Dutch Accreditation Council (RvA) has verified that Tradinco meets the requirements of NEN-EN-ISO/IEC 17025 for a wide range of measurements within these requirements and has issued accreditation.
More information
Tradinco testbank

Products

Calibration & measuring instruments

Discover our range of measurement and calibration products from brands such as Traqc, Druck and WIKA.
More information

Test benches

Tradinco Instruments supplies custom (mobile) test benches for electrical, pressure and temperature calibrations.
More information

AutoCal+

The brand-independent software AutoCal+ to easily and conveniently manage all your calibrations.
More information

Sensors

Tradinco Instruments supplies standard and custom sensors from brands such as Labom, Druck and FSM.
More information

Customer solutions

We are happy to help you advise and think along with you about the right (custom) products and solutions.
More information
view all products

Products

PV624

The PV624 combines manual pressure generation with fully automatic pressure generation and control

Traqc-8 XP2i

The Traqc-8 XP2i for delivering and measuring high pneumatic pressures

CPP1000-X & CPP1600-X

The CPP1000-X and CPP1600-X for hydraulic pressure generation up to 1,600 bar

CPB5000

CPB5000 is ideal for on-site maintenance and service

CPB3500

The pressure balance CPB3500 is a true primary standard

DPI 610E

The DPI 610E combines pressure measurement and generation, signal measurement and loop capability

PTC200 & PTC700

With a range of -22 to 200°C or room temp to 700°C

PTC255 & PTC255i

With a range from room temperature to 255°C

PTC165 & PTC165i 

The PTC165 & PTC165i have a range of -35 to 165°C

43xx

The 40xx to prevent overpressure and dropout situations

8284

The Model 8284 is a rugged station for testing pressure gauges

OEM sensors

Customized sensor solutions

GP2610

The GP2610 is a two-wire temperature switch

GV4610

The GV4610 with a measurement range of -40 ..150 degrees Celsius

GA2610

The GA2610 with a measuring range: -40 ..150 degrees Celcius

Clamp-on sensors

Clamp-on sensors for flow measurement and data storage

MiniTherm sensors

This series consists of the GA2730, GA270 and GA270HY

GV4370

Labom's GV4370 has a measuring range of -50...200 °C

Temperature transmitters

Temperature sensors such as thermocouples and RTDs

Gas expansion thermometers

A wide range of gas expansion thermometers from Labom

Thermometers with clip-on

The FN2 & FN3 with a nominal range of -40°C to 250°C

Bimetal thermometers

These thermometers FA2400, FA8100 and FP2300 from Labom

Mechanical temperature sensors

Our range includes bimetallic and gas expansion thermometers

Board level sensors

CG2010

The CG2010 has a range of 0..160 mbar to 0..2500 mbar

MPL 800

The MPL 800 has a range of -40..85 Celsius

MPL 500/600

The MPL 500/600 has a range of -40..120 Celsius

BN4200

The BN4200 is a pressure gauge with pressure switch

BE4200

The BE4200 has a range of -1...1600 bar

ADROIT6000

The ADROIT6000 with a range of 200 mbar to 350 bar

PASCAL CV4

The PASCAL CV4 has a measuring range of 0.25 bar to 400 bar

PASCAL CV3

The PASCAL CV3 has a range of 80 mbar to 400 bar

PASCAL CS

The PASCAL CS has a range of 100 mbar to 400 bar

PASCAL Ci4

The PASCAL Ci4 has a range of 250 mbar to 400 bar

Universal & Compact sensors

The COMPACT series with a piezoresistive measuring system

UNIK 5800/5900

The UNIK 5800/5900 with a range of 2to 700 bar

UNIK 5600/5700

The UNIK5600/5700 with a range of 70 mbar to 700 bar

UNIK 5000

The UNIK 5000 with a range of 70 mbar to 700 bar

RPS/DPS 8000

RPS/DPS 8000 for high accuracy and stability

PTX 1800

PTX 1800 with a range of 0..0.75m H2O to 0..600m H2O

ECOnomic pressure gauges

Range from -0.6...0 to -1...15 bar and 0...0.6 to 0...160 bar

DPS5000

Druck's DPS5000 is a high-precision, digital pressure sensor for pressure measurements

Compact ECO Series

Labom's Compact ECOnomic series consists of the CA1100 and CA1110

Pressure sensors & pressure transmitters

Tradinco Instruments supplies both standard and custom pressure transmitters of various brands

AMS Trex Device Communicator

For configuring instruments and transmitters

UPS II & III

With a measurement range of 0-24 mA at 21 V and 0-50 V DC voltage

Low pressure regulator 30xx

For setting different ranges up to 10 bar with the internal outlet

High pressure regulator 8810

The 8810 for setting pressures with ranges from 0 to 350 bar

Dirt separator 2525

The 2525 for measuring instruments with a maximum pressure of up to 400 bar

IDT 600 dirt separator

The IDT 600 dirt separator captures harmful particles with a max safe working pressure of 35 bar

Poly-Flo connecting material

The Poly-Flo fittings connect to the instruments under test up to max 10 bar

Minimess connection material

The minimess fittings connect measuring instruments to the instrumentation under test above 10 bar

Mini needle valve T1700

The T1700 for setting vacuum and pneumatic pressures up to 400 bar

Liquid and gas separator 2255

The 2255 is a unit for a hydraulic deadweight tester

Accessories

Make it complete with our extensive range of accessories

Traqc-22 V

The Traqc-22 V for both demineralized water and oil applications

Comparison testers

Comparison testers allow you to test instrumentation in a simple and safe way

Traqc-22 DWT

The Traqc-22 dead weight tester has a range up to 1400 bar

Deadweight testers

Discover the range of deadweight testers with various measuring ranges and accuracies

MK6

The MK6 for test pressures up to 10 bar with the built-in booster

DPI 705E

With a range of 0 to 25 mbar, ... 1400 bar and up to 0.05% FS accuracy

CPG2500

The CPG2500 has a range ranging from 0...25 mbar to 0...2,890 bar

PACE1000

The PACE1000 is a pressure indicator with a range of up to 1000 bar

CPC6050

The CPC6050 for testing and calibrating pressure sensors up to max 210 bar

CPC4000

The CPC4000 for testing and calibrating pressure sensors up to max 210 bar

CPC8000

The CPC800 calibrator for testing and calibrating pressure sensors

Traqc-8 APC

The Traqc-8 APC has a range of up to 250 bar and 0.5% FS accuracy

Portable high pressure calibrators

Discover the Traqc-8 APC and the Traqc-8 XP2i from Tradinco

DPI 611

The DPI 611 has a pressure range of 95% vacuum to 20 bar in less than 30 seconds

DPI 612

Druck's DPI 612 Flex Series consists of 3 high accuracy portable pressure calibrators

DPI 104

The DPI 104 has a range of max 1400 bar and 0.05% FS accuracy

8125

The hand pump 8125 generates vacuum pressure to about -0.75 bar

CTB9500

WIKA's CTB9500 has a range of -45°C to 200°C

CTB9400

WIKA's CTB9400 has a range of 28°C to 300°C

CTD9300

A very compact and lightweight dry-well calibrator

CTD9100

The CTD9100 calibrator is well suited for calibrations in locations

Traqc-3 FM

The Traqc-3 FM is a rugged and accurate field calibrator

Traqc-3 LL

The Traqc-3 LL is a robust and accurate calibration oven

Metis

Metis allows you to build a test bench modularly based on your needs

Custom made test benches

Our test benches are high quality, durable and have a long service life

Mobile test benches

Tradinco Instruments also supplies mobile and portable test benches

Calibration test benches

Tradinco Instruments provides customized calibration test benches

Traqc-9 C

The Traqc-9 C series consists of five pneumatic pressure regulators

DPI 880

Druck's DPI 880 is a multifunction calibrator

Traqc-9 MAVS

The Traqc-9 MAVS is ideal for use in electrical test benches

Pneumatic test benches

Tradinco Instruments supplies customised pneumatic test benches

Electrical test benches

Tradinco designs and supplies test benches for electrical calibrations

Submersible pressure sensors

Pressure switches

Tradinco has a wide and varied range of pressure switches brands such as MPL and Labom

Precision pressure gauges

The pressure gauges with a range between -1 . to max 600 bar

Industrial pressure gauges

Pressure gauges with a measuring range between -1...600 bar

Temperature sensors

We supply sensors from brands such as Labom, Druck and FSM.

Pressure gauges

Pressure sensors

Traqc-2

The Traqc-2 is a calibrator that can regulate and measure pressure up to 10 bar with an accuracy of 0.15% FS

Portable pressure calibrators

Pressure calibrators with various measurement ranges and accuracies

Traqc-20 LPC

The Traqc-20 LPC generates and very accurately measures any desired low pressure point

DPI 620 Genii

The DPI 620 Genii (IS) is Druck's multifunction calibrator

PACE 5000 & 6000

The PACE series consists of single and double pressure modules

Vacuum leak tester

Leakage measurements based on differential pressure and flow under vacuum conditions

Leak testers

Leakage measurements based on differential pressure and flow

Multifunctional calibration & measuring instruments

We provide instruments for measuring and simulating parameters such as pressure, temperature and electrical signals

Electrical calibration & measuring instruments

Tradinco has a wide range of electrical calibration and measurement instruments to ensure the quality and safety of products or installations

Temperature calibration & measuring instruments

Discover the extensive range of temperature calibration and measuring instruments

Pressure calibration & measuring instruments

Tradinco Instruments has a wide range of pressure calibration and measurement instruments to ensure the quality and safety of your products

PV211

The PV211 hand pump has a range of -0.95 to 40 bar

PV212

Druck's PV212 generates hydraulic pressure up to 1000 bar

8145

The 8145 with double-action pumping system generates 25 bar

Traqc-5 P40/60

The Traqc-5 P40 or P60 has a range of -0.95 to 40 or 60 bar

Traqc-5 P4

The Traqc-5 P4 is a hand pump with and range of 0.3 to 4 bar

PV411

The PV411 generates pneumatic, hydraulic, vacuum or low pressure

PV210

The PV210 generates vacuum up to 90% and pressure up to 3000 mbar

8135

The 8135 hand pump generates pneumatic pressure up to approximately 5 bar

Traqc-5 P700/1000

The Traqc-5 P700/1000 generates pressure up to 700 or 1000 bar

DPI 800 series

Druck's DPI 800 series has a range of 25mbar to 700 bar

Traqc-9 P

Tradinco's Traqc-9 P has a measurement range from vacuum to 1000 bar

Hand pumps

Robust hand pumps with a range between 0 to 1000 bar

Automatic pressure calibrators

A variety of automatic pressure calibrators with multiple ranges

Pressure indicators

Our offerings include multiple measurement ranges and accuracies

Traqc-1 DPG

The Traqc-1 DPG has a range of -1 to 1000 bar and an accuracy of 0.5% FS or 0.1% FS

Portable digital pressure gauges

Pressure gauges with various measuring ranges and accuracies

Customer solutions

We are happy to help you advise and think along with you about the right (custom) products and solutions.

Sensors

Tradinco Instruments supplies standard and custom sensors from brands such as Labom, Druck and FSM.

AutoCal+

The brand-independent software AutoCal+ to easily and conveniently manage all your calibrations.

Calibration & measuring instruments

Discover our range of measurement and calibration products from brands such as Traqc, Druck and WIKA.

Test benches

Tradinco Instruments supplies custom (mobile) test benches for electrical, pressure and temperature calibrations.

Services

Services

Calibration service

Tradinco stands for a unique and distinctive service of your calibration instrumentation.
discover more

Inspections & testing

You can come to Tradinco for various inspections, NEN 3140 inspections & leak tests.
discover more

Training courses

The best (customised) training courses on calibration for both novice and advanced technicians.
discover more

Brands

Draagbare drukkalibratoren

Traqc

The high quality Traqc products range from indicators and calibrators to a deadweight tester and comparison tester.
View brand
Draagbare drukkalibratoren

Druck

Tradinco Instruments is Channel Partner and Service Provider of Druck. We not only sell Druck products, but also calibrate, service and repair.
View brand
Draagbare drukkalibratoren

Labom

Tradinco Instruments is Labom's exclusive partner in the Netherlands. We not only sell standard products, but also customized products.
View brand

News

Directiewissel 2023

Management change at Tradinco Instruments

As of January 1st of this year, Sander de Knegt has been appointed as the new Managing Director of Tradinco Instrumenten-Apparaten in Zoetermeer.
Contact us
magnifiercrosschevron-down